Honda NSX-T 1998 Manual page 1101

Main Menu
Seats
Seat Cover Replacement (cont'd)
7. Detach the hooks, then remove the seat-back
cushion.
8. Detach the clips, then remove the seat cover.
SEAT COVER
Table of Contents
HOOKS
SEAT-BACK
CUSHION
Clip locations
9. Installation is the reverse of the removal procedure.
NOTE:
• To prevent wrinkles when installing the seat
cover, make sure the material is stretched even-
ly over the frame before securing all the hooks
and clips.
• If necessary, replace any damaged clips.
• Before installing the seat cushion, scrape the old
adhesive smoothly from the seat cushion frame.
Clean the bonding surface with a sponge
dampened in alcohol.
Apply an adhesive to the shadowed area as
shown.
ADHESIVE AREA
Forward
SEAT CUSHION
FRAME