Honda NSX-T 1998 Manual page 480

Main Menu
Piston/Connecting Rod Assemblies and Crankshaft
Removal
1. Remove the left side cover.
LEFT SIDE COVER
2. Remove the oil screen.
BAFFLE PLATE
OIL PASS
PIPE
3. Remove the baffle plate.
4. Remove the oil pass pipe and joint.
5. Remove the oil pump.
Table of Contents
OIL SCREEN
O-RINGS
Replace
OIL PUMP
6. If you can feel a ridge of metal or hard carbon
around the top of any cylinder, remove it with a
ridge reamer. Follow
instructions.
CAUTION: If the ridge is not removed, it may
damage the pistons as they are pushed out.
7. Remove the bearing cap bridge.
reamer manufacturer's
RIDGE REAMER
BEARING CAP
BRIDGE