Honda NSX-T 1998 Manual page 494

Main Menu Table of Contents
Oil Seal
Installation
The seal surface on the block should be dry.
Apply a light coat of oil to the crankshaft and to
the lip of the seal.
1. Using the special tools, drive in the flywheel-end seal
until the driver bottoms against left side cover.
DRIVER
ATTACHMENT
07948-SB00101
2. Confirm clearance is equal all the way around with
a feeler gauge.
NOTE: Refer to page
pump side oil seal.
DRIVER
07749-0010000
8-9 for installation of the oil