Table of Contents
Advertisement
Main Menu
Pressure Testing
(cont'd)
• Clutch Low/High Pressure Measurement
While testing, be careful of the rotating
rear wheels.
1.
Allow the rear wheels to rotate freely.
2.
Start the engine and let it idle.
3.
Shift to
position.
4.
Slowly press down the accelerator pedal to increase
engine rpm until pressure is indicated on the oil
pressure gauge. Then release the accelerator pedal,
allowing the engine return to an idle, and measure
the pressure reading.
Table of Contents
5.
6. Repeat steps 4 and 5 for each clutch pressure being
With the engine idling, press down the accelerator
pedal approximately 1/2 of its possible travel and
increase the engine rpm until pressure is indicated
on the gauge. Note the highest pressure reading
obtained.
inspected.
Advertisement
Chapters
Table of Contents
