Honda NSX-T 1998 Manual page 1163

Main Menu Table of Contents
Rear Pillar Seal/Retainer
Replacement
NOTE:
• When the rear pillar seal has been removed, and/or it
is damaged, replace it with new one.
• Have an assistant help replace the rear pillar seal.
1. Remove the roof.
2. Remove the rear roof rail trim (see page 20-80).
3. Detach the clips from the bottom of both rear pillar.
REAR PILLAR
SEAL
4. Remove the screws, and detach the clips from each
side, then remove the rear pillar seal.
Clip locations
Screw locations, 2
Clip locations, 2