Cylinder Head/Valve Train - Honda NSX-T 1998 Manual

Main Menu
CYLINDER HEAD BOLT
M/T: 11 x 1.5 mm
96 N-m (9.8 kgf-m, 71 Ibf-ft)
A/T: 11 x 1.5 mm
76 N-m (7.8 kgf-m, 56 Ibf-ft)
Apply engine oil to
the bolt threads.
CYLINDER HEAD
GASKET
Replace.
DOWEL PIN
OIL CONTROL ORIFICE
Remove with 6 mm
bolt and clean.
Table of Contents
INTAKE VALVE
SPRING OUTER
INTAKE VALVE
SPRING INNER
VALVE SEAL
VALVE GUIDE
LOST MOTION
ASSEMBLY
O-RINGS
Replace.
VALVE KEEPERS
CYLINDER HEAD BOLTS
SPRING RETAINER
M/T: 11 x 1.5 mm
A/T: 11 x 1.5 mm
VALVE SPRING
Apply engine oil to
SEAT
the bolt threads.
VALVE SPRING SEAT
CYLINDER HEAD ORIFICE
Remove with 6mm
bolt and clean.
96 N-m (9.8 kgf-m, 71 Ibf-ft)
76 N-m (7.8 kgf-m, 56 Ibf-ft)
EXHAUST VALVE
SPRING
SPRING RETAINER
VALVE KEEPERS
VALVE SEAL
VALVE GUIDE
LOST MOTION
ASSEMBLY
Test, 6-33
CYLINDER HEAD
GASKET
Replace.