Honda NSX-T 1998 Manual page 511

Main Menu
Oil Cooler, Oil Filter Base
Illustrated Index
NOTE:
• Use new O-rings when reassembling.
• Apply oil to O-rings before installation.
• Use liquid gasket, Part No. 08718-0001 or 08718-0003.
SPECIAL BOLTS
8 x 1.25 mm
22 N-m (2.2 kgf-m,
16 Ibf-ft)
Replace.
OIL FILTER BASE
OIL FILTER
22 N-m (2.2 kgf-m
16 Ibf-ft)
Replacement,
Table of Contents
8-5
2 mm PIN
O-RING
Replace
ENGINE OIL
PRESSURE SWITCH
18 N-m (1.8 kgf-m, 13 Ibf-ft)
1/8 in. BSPT (British Standard
Pipe Taper) 28 Threads/inch.
Use proper liquid gasket.
OIL COOLER CENTER BOLT
49 N-m (5.0 kgf-m, 36 Ibf-ft)
SPRING
RELIEF VALVE
Valve must slide freely in bolt bore.
If valve is scored, replace it.
O-RING
Replace.
8 x 1.25 mm
22 N-m (2.2 kgf-m, 16 Ibf-ft)
ENGINE OIL COOLER