Conventions Used In This Manual - Allen-Bradley Kinetix 5700 User Manual

Preface
Table 1 - Summary of Changes (continued)
Topic
• Added Accessory Module Selection with DC-bus power supply configurations that moved from chapter 3.
• Added regenerative bus supply system configurations illustrating the minimum number of accessory modules required.
Updated the 8720MC-RPS or Other Regenerative Power Supply example configurations with a DC-bus conditioner module.
Added accessory module flowcharts designed to help determine the minimum number of accessory modules required.
Added the 2198-S312-P-T control power T-connector and bus bar to support 2198-S263-ERSx and 2198-S312-ERSx single-axis inverters.
Added Converter OK Relay that explains how the circuitry is used to support applications that migrate from 8720MC-RPS units to the 2198-RPxxx regenerative
bus supply.
Added footnotes (1) and (2) that further specify wire size to meet CE requirements for 2198-P070 DC-bus power supplies.
Updated Maximum Cable Lengths with examples for 2198-RPxxx regenerative bus supplies.
Added Customer-supplied Motor Power Cables to support wiring 2198-S263-ERSx and 2198-S312-ERSx single-axis inverter applications that require
conductors larger than 2 AWG.
Updated External Active-shunt Connections with Powerohm catalog numbers that apply to regenerative bus supplies and added information for wiring
regenerative bus supplies to the Active Shunt (RC) connector.
Added Hardware Fault Tolerance (HFT) specifications to the table.
Added Active Shunt Wiring Examples.
Added external-bus capacitance calculations and updated the System Sizing Example with the external-bus capacitance value.
Added the Maximum Motor Cable Lengths for Kinetix 5700 Power Supplies (Appendix D).
Updated Motor Analyzer Category Troubleshooting with rated slip-speed information.
Conventions Used in This
Manual
12
These conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural steps
• Numbered lists provide sequential steps or hierarchical information
• When catalog number 2198-xxxx-ERS3 appears in this publication
without series designation, the topic applies to series A and B drives
IMPORTANT Throughout this publication, when the Kinetix 5700 inverter catalog
• The 2198-CAPMOD-2240 capacitor module, 2198-CAPMOD-
DCBUS-IO extension module, and 2198-DCBUSCOND-RP312
DC-bus conditioner module are collectively referred to as accessory
modules
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
number ends in -ERSx, for example 2198-D057-ERSx, the variable
(x) indicates that the inverter (using this example) can be
2198-D057-ERS3 or 2198-D057-ERS4.
Page
59
64
65
87
111
141
155
172
183
307
360
399
401
423