Configure The Axis For Slat - Allen-Bradley Kinetix 5700 User Manual

Configure the Axis for SLAT

Follow these steps to configure the SLAT attributes.
1. In the Controller Organizer, right-click an axis and choose Properties.
2. Select the General category.
The General dialog box appears.
3. From the Axis Configuration pull-down menu, choose Velocity Loop.
The Velocity Loop dialog box appears.
4. Enter values for the Velocity Loop attributes appropriate for your
application.
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Motor Control Feature Support Appendix E
431