Configure Induction-Motor Closed-Loop Control Axis Properties - Allen-Bradley Kinetix 5700 User Manual

Configure Induction-motor
Closed-loop Control Axis
Properties
Follow these steps to configure induction-motor closed-loop control axis
properties.
1. In the Controller Organizer, right-click an axis and choose Properties.
2. Select the General category.
The General and Associated Module dialog box appears.
3. From the General pull-down menus, change configuration settings as
needed for your application.
4. From the Associated Module>Module pull-down menu, choose your
Kinetix 5700 drive.
The drive catalog number populates the Module Type and Power
Structure fields.
5. Click Apply.
6. Select the Motor category.
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Configure and Start the Kinetix 5700 Drive System Chapter 6
249