Verify The Firmware Upgrade - Allen-Bradley Kinetix 5700 User Manual

Verify the Firmware Upgrade

Follow these steps to verify your firmware upgrade was successful.
TIP Verifying the firmware upgrade is optional.
1. Open your RSLinx software.
2. From the Communications menu, choose RSWho.
3. Expand your Ethernet node, Logix backplane, and EtherNet/IP
network module.
4. Right-click the drive module and choose Device Properties.
The Device Properties dialog box appears.
5. Verify the new firmware revision level.
6. Click Close.
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Upgrade the Drive Firmware Appendix B
389