Motor Power/Brake Cable Series Change - Allen-Bradley Kinetix 5700 User Manual

Chapter 5 Connect the Kinetix 5700 Drive System
MP-Series™ Motors
and Actuators
Dimensions are in mm (in.)
MP-Series Motors
and Actuators
164
Table 86 - Legacy Motor Power Cables
Motor Cable
Standard
Continuous-flex
Table 87 - Induction Motor Power Cable Specifications
Cable Manufacturer
Belden
Lapp Group
SAB

Motor Power/Brake Cable Series Change

Motor power and brake conductors on 2090-CPBM7DF (series A) cables have
the following dimensions from the factory. If your cable is reused from an
existing application, the actual conductor lengths could be slightly different.
Figure 108 - 2090-CPBM7DF (series A) Power/brake Cable Dimensions
Dimensions are in mm (in.)
150 (5.9)
Overall Cable Shield
Motor power and brake conductors on 2090-CPBM7DF (series B) 12 and 10
AWG standard, non-flex cables provide (drive end) shield braid and conductor
preparation designed for compatibility with multiple Kinetix servo-drive
families, including Kinetix 5700 drives.
Figure 109 - 2090-CPBM7DF (series B, 10 or 12 AWG) Power/brake Cable Dimensions
71 (2.80)
12.7 (0.50)
5.0 (0.20)
Overall Cable Shield
Heat Shrink
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Description
Power/brake, threaded
Power-only, bayonet
Power/brake, threaded
Power-only, threaded
Power-only, bayonet
Cable Series Voltage Rating
29500-29507
ÖLFEX VFD XL 600V
VFD XLPE TR
102 (4.0)
Edge of
Cable Jacket
Brake Shield (remove)
635 (25)
305 (12.0)
234 (9.20)
5.0 (0.20)
Cat. No.
2090-XXNPMF-xxSxx
2090-XXNPMP-xxSxx
2090-CPBM4DF-xxAFxx
2090-CPWM4DF-xxAFxx
2090-XXTPMP-xxSxx
Temperature Rating
90 °C (194 °F)
Power Conductors
Brake
Conductors
15.0 (0.59)
Power Conductors
Brake
Conductors
8.0 (0.31)