Ethernet Communication Specifications - Allen-Bradley Kinetix 5700 User Manual

Attribute
Digital input type
Input current (with 24V applied)
On-state input voltage
Off-state input voltage
Pulse reject filtering (applies to registration function only)
Pulse reject filtering (debounce filter)
Applies to all other input functions, Home, for example.
Propagation delay (registration functions, inverters only)
Registration accuracy (inverters only)
Registration repeatability (inverters only)
Windowed registration invalid-to-valid event delay (inverters only)
INx
COM
Table 46 - Digital Input Specifications
Value
Optically isolated, active high, single-ended, current sinking (EN 61131-2 Type 1)
12 mA, typical
15...30V @ 15 mA, max
-1.0...5.0V
12.0 μs
20 ms, nom
0 (delay compensated)
±3 μs
700 ns
125 μs, min
Figure 65 - Digital Input Circuitry
IOD-1 or IOD-3
24V DC
IOD-2
Kinetix 5700 Drive Module

Ethernet Communication Specifications

The PORT1 and PORT2 (RJ45) Ethernet connectors provide
communication with the Logix 5000™ controller.
Attribute
Communication
Cyclic update period
Embedded switch features
Auto MDI/MDIX crossover detection/correction Yes
Port-to-port time synchronization variation
Cabling
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Connector Data and Feature Descriptions
Value
The drive auto-negotiates speed and duplex modes. These modes
can be forced through the Logix Designer application. 100BASE-
TX, full duplex is recommended for maximum performance.
1.0 ms, min
Three-port, cut-through, time correction on IEEE-1588 packets,
limited filtering, quality of service with four priority levels
100 ns, max
CAT5e shielded, 100 m (328 ft) max
Chapter 4
Drive Module
X X X
X X X
X X X
X X X
– X –
X X X
– X –
– X –
– X –
– X –
INPUT
109