External Active-Shunt Connections; Dc-Bus Power Supply Active Shunt Connections; Regenerative Bus Supply Active Shunt Connections - Allen-Bradley Kinetix 5700 User Manual

External Active-shunt
Connections
Active shunts are available from the Rockwell Automation Encompass™ partner
Powerohm Resistors, Inc. See
Powerohm shunts compatible with your Kinetix 5700 power supply.
Rockwell Automation Encompass Partners
Powerohm Resistors, Inc.
Follow these guidelines when wiring your Powerohm active shunt:
• Refer to External Active Shunt Modules
considerations.
• Refer to Active Shunt Wiring Examples
• Refer to the installation instructions provided with your Bulletin
PWBxxx and PKBxxx Powerohm shunt module.
IMPORTANT To improve system performance, run wires and cables in the wireways as
established in

DC-bus Power Supply Active Shunt Connections

Make active shunt connections in drive systems that include the
DC-bus power supply and Powerohm PKBxxx or PWBxxx active shunts at the
external DC-bus studs on accessory modules.
Refer to Wire the External DC-bus Connections

Regenerative Bus Supply Active Shunt Connections

Make active shunt connections to the 2198-RPxxx regenerative bus supply at
the active shunt (RC) connector or the external DC-bus studs on accessory
modules, depending on the shunt type.
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Connect the Kinetix 5700 Drive System
Active Shunt Considerations
Contact Information
5713 13th Street
Katy, Texas 77493
Tel: (800) 838-4694
http://www.powerohm.com
on page 76
on page
Chapter 2.
on page
Chapter 5
on page 52 for
for noise zone
360.
184.
183