Install The Kinetix 5700 Add-On Profile - Allen-Bradley Kinetix 5700 User Manual

Table 110 - AOP Installation Requirement
Drive Cat. No.
2198-xxxx-ERS3 (series A)
2198-xxxx-ERS3 (series B)
2198-xxxx-ERS4
(1) Drive firmware 7.001 enhancements are available only with the Studio 5000 Logix Designer, version 29.00 or later, firmware
update. The AOP for firmware 7.001 is not available for download.
(2) Drive firmware 9.001 enhancements are available only with the Studio 5000 Logix Designer, version 31.00 or later, firmware
update. The AOP for firmware 9.001 is not available for download.
(3) Drive firmware 10.001 enhancements are available only with the Studio 5000 Logix Designer, version 32.00 or later, firmware
update. The AOP for firmware 10.001 is not available for download.

Install the Kinetix 5700 Add-On Profile

Download Add-On profiles (AOP) from the Product Compatibility
Download Center (PCDC) website:
http://compatibility.rockwellautomation.com/Pages/home.aspx.
Follow these steps to download the Kinetix 5700 Add-On profile.
1. Go to the Product Compatibility Download Center.
The Compatibility & Downloads webpage appears.
2. Enter Kinetix 5700 in the Search PCDC window.
3. Click the appropriate firmware revision and follow prompts to
download.
4. Extract the AOP zip file and run Setup.
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Configure and Start the Kinetix 5700 Drive System
Logix Designer
Drive Firmware Revision
Application Version
26.00 or 27.00
4.001
28.00 or later
26.00, 27.00, 28.00
5.001
29.00 or later
(1)
7.001 or later 29.00 or later
(2)
9.001 or later 31.00 or later
(3)
10.001 or later 32.00 or later
Chapter 6
Kinetix 5700
AOP Needed?
Yes
No
Yes
No
No
No
No
199