Configure the Flux Up Attributes
Follow these steps to configure the flux-up attributes.
1. In the Controller Organizer, right-click an axis and choose Properties.
2. Select the Parameter List category and scroll to FluxUpControl.
3. From the FluxUpControl pull-down menu, choose the proper delay
value appropriate for your application.
4. If you chose Manual Delay in
attribute appropriate for your application.
If you chose No Delay or Automatic Delay in
attribute does not apply.
Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Motor Control Feature Support
step
3, enter a value in the FluxUpTime
step
3, the FluxUpTime
Appendix E
419