L
A
C
INK
GGREGATION
OMMANDS
SHOW ETHERCHANNEL
show etherchannel
Overview
Use this command to display information about a LACP channel specified by the
channel group number.
The command output also shows the thrash limiting status. If thrash limiting is
detected and the action parameter of the
vlan-disable, the output will also show the VLANs on which thrashing is detected.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available on our website at alliedtelesis.com.
show etherchannel [<1-32>]
Syntax
Mode
User Exec and Privileged Exec
awplus#
Example
Output
Figure 15-3: Example output from show etherchannel
awplus#
Example
Output
Figure 15-4: Example output from show etherchannel for a particular channel
613-50137-01 Rev A
Parameter
Description
<1-32>
Channel-group number.
show etherchannel
awplus#show etherchannel
LAG Maximum
LAG Static
Maximum: 96
LAG Dynamic Maximum: 32
LAG Static
Count
LAG Dynamic Count
LAG Total
Count
Lacp Aggregator: po1
Member:
port1.0.5
port1.0.6
show etherchannel 1
awplus#show etherchannel 1
Aggregator po1 (4601)
Mac address: 00:00:00:00:00:00
Admin Key: 0001 - Oper Key 0000
Receive link count: 0 - Transmit link count: 0
Individual: 0 - Ready: 0
Partner LAG: 0x0000,00-00-00-00-00-00
Link: port1.0.1 (5001) disabled
Link: port1.0.2 (5002) disabled
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
thrash-limiting
: 128
: 0
: 1
: 1
command is set to
"Getting Started
Guide, which is
532