0X5344: Remc Status Register (Remc_St) - Epson S1C17704 Technical Manual

0x5344: REMC Status Register (REMC_ST)

Register name Address Bit
REMC 0x5344 D7–1 –
Status Register (8 bits)
(REMC_ST) D0
D[7:1] Reserved
D0 REMDT: Transmit/Receive Data Bit
Set transmit data during data transmission. Read the received data from this bit during data reception.
1 (R/W): 1 (H)
0 (R/W): 0 (L) (default)
When REMEN (D0/REMC_CFG register) is set to 1, the REMC module modulates the REMDT
set value with the carrier signal and outputs the modulated signal from the REMO pin during data
transmission. During data reception, the signal level of the input data pulse is set to this bit.
S1C17704 TECHNICAL MANUAL
Name Function
reserved
REMDT Transmit/receive data
EPSON
21 REMOTE CONTROLLER (REMC)
Setting Init. R/W
–
1 1 (H) 0 0 (L)
Remarks
– – 0 when being read.
0 R/W
21-15