Details Of Control Registers - Epson S1C17704 Technical Manual

21 REMOTE CONTROLLER (REMC)

21.7 Details of Control Registers

Address
0x5340 REMC_CFG REMC Configuration Register
0x5341 REMC_PSC REMC Prescaler Clock Select Register
0x5342 REMC_CARH REMC H Carrier Length Setup Register
0x5343 REMC_CARL REMC L Carrier Length Setup Register
0x5344 REMC_ST REMC Status Register
0x5345 REMC_LCNT REMC Length Counter Register
0x5346 REMC_IMSK REMC Interrupt Mask Register
0x5347 REMC_IFLG REMC Interrupt Flag Register
The following describes each REMC register. These are all 8-bit registers.
Note: When setting the registers, be sure to write a 0, and not a 1, for all "reserved bits."
21-10
Table 21.7.1 List of REMC Registers
Register name
EPSON
Function
Selects/enables transmission/reception.
Selects a prescaler output clock.
Sets up the H period of the carrier.
Sets up the L period of the carrier.
Transmit/receive bit
Sets the transmit/receive data length.
Enables/disables interrupt.
Indicates/resets interrupt occurrence status.
S1C17704 TECHNICAL MANUAL