Electromagnetic Brake Cable - Mitsubishi Electric HG-MR Instruction Manual

5. WIRING OPTION
(2) Internal wiring diagram
(3) When fabricating the motor power cable
Prepare the following parts, and fabricate it according to the wiring diagram in (2) in this section. Refer to
section 5.6 for the specifications of the cable to use.

5.5 Electromagnetic brake cable

These cables are electromagnetic brake cables for the HG-MR/HG-KR series servo motors. The numbers in
the cable length field of the table indicate the symbol filling the underline "_" in the cable model.
Refer to section 4.2.1 for wiring.
Cable model
MR-BKS1CBL_M-A1-L
MR-BKS1CBL_M-A2-L
MR-BKS1CBL_M-A1-H
MR-BKS1CBL_M-A2-H
MR-BKS2CBL03M-A1-L
MR-BKS2CBL03M-A2-L
MR-J4W03PWCBL_M-H
Servo motor power-
side connector
White
Yellow/green
(Note) Black
Red
Note. These are not shielded cables.
Connector set model
MR-J4W03CNP2-
2P
MR-J4W03CNP2-
Tab housing: J21DPM-06V-KX
20P
Contact: BJ2M-21GF-M1.0N
(JST)
Cable length
0.3 m 2 m 5 m 10 m
2 5 10
2 5 10
2 5 10
2 5 10
03
03
5 - 30
MR-J4W03PWBRCBL_M-H
1B V
1A E
(Note)
2B W
2A U
Servo motor-side connector
IP rating Bending life
IP65 Standard Load-side lead for HG-MR/HG-KR
Opposite to load-side lead for HG-
IP65 Standard
MR/HG-KR
Long
IP65 Load-side lead for HG-MR/HG-KR
bending life
Long Opposite to load-side lead for HG-
IP65
bending life MR/HG-KR
IP55 Standard Load-side lead for HG-MR/HG-KR
Opposite to load-side lead for HG-
IP55 Standard
MR/HG-KR
Servo motor power-
side connector
White
1B V
Yellow/green
1A E
Black
2B W
Red
2A U
3B B1
3A B2
Application