App. 7 Crimping Connector For Cnp3 - Mitsubishi Electric HG-MR Instruction Manual

APPENDIX

App. 7 Crimping connector for CNP3_

No. Name
1) Connector set MR-J3WCNP3-
DL
2) Connector set MR-J3WCNP3-
DL-20P
3) Connector set MR-J3WCNP3-
D2L
4) Connector set MR-J3WCNP3-
D2L-20P
1)2)3)4)
Note. This figure shows the 3-axis servo amplifier.
Model
The connector set is used for connecting to the servo amplifier directly using
MR-PWS1CBL_M-_.
For CNP3A/CNP3B/CNP3C
Receptacle housing: F35FDC-04V-K
Receptacle contact: LF3F-41GF-P2.0
(JST)
Applicable wire
Wire size: 0.75 mm
Insulator OD: 1.8 mm to 2.8 mm
The crimping tool (YRF-880) is required.
The connector set is used for connecting to the servo amplifier directly
without using MR-PWS1CBL_M-_.
For CNP3A/CNP3B/CNP3C
Receptacle housing: F35FDC-04V-K
Receptacle contact: BF3F-71GF-P2.0
(JST)
Applicable wire
Wire size: 1.25 mm
Insulator OD: 2.4 mm to 3.4 mm
The crimping tool (YRF-1070) is required.
MR-J4W_-_B
Servo amplifier
CNP3A
CNP3B
CNP3C (Note)
Description
(AWG 19) to 1.25 mm (AWG 16)
2 2
(AWG 16) to 2.0 mm (AWG 14)
2 2
App. - 29
Application
Quantity: 1
For thin
wire
Quantity:
20
For thin
wire
Quantity: 1
For thick
wire
Quantity:
20
For thick
wire