Mitsubishi Electric HG-MR Instruction Manual page 40

3. CONNECTORS USED FOR SERVO MOTOR WIRING
Plug
Connector
Feature
configuration
Straight
IP67
EN compliant
Angle
G
(for power
supply)
Straight
(Note 1)
General
environment
Angle
Note 1. Not comply with EN.
2. The other side connector
Plug
Backshell
Connector
Feature
configuration
Straight
IP67
EN compliant
H
(for power
Angle
supply)
Straight
(Note 1)
General
environment
Angle
Note 1. Not comply with EN.
2. The other side connector
3. This connector can be used together with the backshell CE05-32BS-S-D-OB only when the following condition is satisfied. The
outer diameter of the cable used for the HG-JR 1000 r/min series (6 kW to 12 kW) or 1500 r/min series (7 kW to 15 kW) is
more than 23.8 mm.
4. The backshell is used for connecting CE05-6A32-17SD-D and CE3057-24A-_-D. Contact the manufacturer.
Cable clamp Cable
Plug (DDK)
Type Model
CE05-6A22-22SD-D-BSS
Applicable wire size: AWG 10 to 8
CE05-8A22-22SD-D-BAS
Applicable wire size: AWG 10 to 8
D/MS3106B22-22S
Applicable wire size: AWG 10 to 8
D/MS3108B22-22S
Applicable wire size: AWG 10 to 8
Cable clamp Cable
Plug (DDK)
Type Model
(Note 3)
CE05-6A32-17SD-D
Applicable wire size: AWG 4
CE05-6A32-17SD-D-BSS
Applicable wire size: AWG 6 to 4
CE05-8A32-17SD-D-BAS
Applicable wire size: AWG 6 to 4
D/MS3106B32-17S
Applicable wire size: AWG 6 to 4
D/MS3108B32-17S
Applicable wire size: AWG 6 to 4
Plug Cable clamp
Cable clamp (DDK)
Cable OD
[mm] (reference)
9.5 to 13
12.5 to 16
9.5 to 13
12.5 to 16
15.9 or less
(bushing ID)
Plug Cable clamp
Backshell (DDK)
Cable OD
Model
[mm] (reference)
30 to 32.5
(Note 4)
CE05-32BS-S-D-OB
27 to 29.6
22 to 23.8
23.8 or less
(bushing ID)
3 - 9
Cable
Servo motor
power supply
connector
Model
CE3057-12A-2-D
CE3057-12A-1-D
CE3057-12A-2-D
CE3057-12A-1-D
MS3102A22-22P
D/MS3057-12A
Cable
Cable clamp (DDK) Servo motor
power supply
Model
CE3057-24A-1-D
CE3057-24A-2-D
CE3057-20A-1-D
MS3102A32-17P
D/MS3057-20A
(Note 2)
connector
(Note 2)