Mitsubishi Electric HG-MR Instruction Manual page 264

8. HG-JR SERIES
Servo motor
Standard
MR-J4-700A
MR-J4-700A-RJ
MR-J4-700B
MR-J4-700B-RJ
MR-J4-700B-RJ010
HG-JR703
MR-J4-700B-RJ020
MR-J4-700GF
MR-J4-700GF-RJ
MR-J4-DU900B
MR-J4-DU900B-RJ
MR-J4-11KA
MR-J4-11KA-RJ
MR-J4-11KB
MR-J4-11KB-RJ
MR-J4-11KB-RJ010
HG-JR903
MR-J4-11KB-RJ020
MR-J4-11KGF
MR-J4-11KGF-RJ
MR-J4-DU900B
MR-J4-DU900B-RJ
Note 1. The maximum torque can be increased to 400% of the rated torque.
2. When a 1-phase 200 V AC input is used, the maximum torque cannot be increased to 400% of the rated torque.
3. This is applied when the maximum torque is increased by enabling the parameter (maximally increased torque function when
drive unit is connected).
Servo amplifiers/Drive units
MR-J4 1-axis
When the maximum
Maximally increased
torque is 400%
torque (Note 3)
(Note 1)
MR-J4-DU900B
MR-J4-DU900B-RJ
8 - 3
MR-J4 2-axis
When the maximum
torque is 400%
Standard
(Note 1)