Maintenance Task Grace Period; Marking Maintenance Tasks Complete; Undoing The Completed Marker - Siemens Rapidlab 1200 Operator's Manual

5-62

Maintenance Task Grace Period

The Grace Period is a defined amount time before or after the scheduled due date. When
you perform a maintenance task within this grace period and mark the task as complete,
the system automatically sets the next date for the task. The grace periods supported for
the maintenance tasks are shown in the following table:
Frequency of Task
Daily
Twice Weekly
Weekly
Every Two Weeks
Monthly
Every Two Months
Quarterly
Twice Yearly
Yearly
As Required

Marking Maintenance Tasks Complete

NOTE:
two days. When you select any other day in the calendar grid, the system disables the
Completed button.
1. Select
2. Select the maintenance task you completed.
3. Select

Undoing the Completed Marker

When you select the Completed button to mark a task as completed, it becomes an Undo
button. If you marked the task incorrectly, you can now undo the mark.
02087462 Rev. V
You can only mark tasks Completed on the current date for either of the previous
Status > Maintenance > Schedule
.
Completed
Rapidlab 1200 Operator's Guide: Maintenance
Grace Period
None
+ 1 day
+ 1 day
+ 1 day
+ 1 day
+ 3 days
+ 3 days
+ 3 days
+ 3 days
None
.