Siemens Rapidlab 1200 Operator's Manual page 225

Rapidlab 1200 Operator's Guide: Troubleshooting
c. Insert the clot clearing tool in the place of the pO
1
2
Figure 6-5
d. Press the black lever (item 2, Figure 6-5), located below the black
3. Fill the syringe with water.
4. Insert the syringe in clot clearing tool (item 1, Figure 6-6).
1
2
Figure 6-6
a. If using a Luer Lock syringe, thread the syringe into the clot clearing tool
clot clearing tool
black lever
Clot Clearing Tool inserted in pO
spring-loaded latch assembly, to reapply pressure to the sensor assembly.
Clot clearing tool
Syringe
Syringe inserted in Clot Clearing Tool
to ensure the syringe is secured firmly to the clot clearing tool.
sensor.
2
Sensor Slot
2
02087462 Rev. V
6-19