Siemens Rapidlab 1200 Operator's Manual page 170

5-28
4. Remove the waste assembly:
a. Lift the orange lever up.
1
Figure 5-14
b. Slide the waste assembly to the right.
5. Clean the waste assembly with the 10% bleach solution.
6. Replace the waste assembly and push the orange lever down.
7. Place the new waste bottle in the waste assembly.
8. Install a new AutomaticQC cartridge.
9. Select
10. Dispose of the bleach solution according to your institution's protocol.
02087462 Rev. V
Orange lever
Waste Assembly
.
Return
Rapidlab 1200 Operator's Guide: Maintenance