Table of Contents
Advertisement
Rapidlab 1200 Operator's Guide: System Configuration
7. If you select a Calibration Report, select either
Refer to Generating Calibration Reports‚ page 3-3.
8. If you are selecting a Sample or QC report, select
on the report.
The default for including ranges is off.
9. If you want to print the report to the other printer, select it and make the
selections you want for the report on that printer.
10. Select another report, as needed.
When you select another report, the system displays the options for that
report. You must repeat the above procedure to set up printing for each report
that you want to print.
11. When you are done selecting reports, select
Setting up Barcode Options
Use this screen to turn the barcode scanner on or off, and to specify the symbology
and format for patient ID, accession number, and password barcodes.
This screen can also be used to select the barcode only option for Patient ID data
entry. Refer to Selecting the Barcode Only Option for Patient ID Entry‚
page 8-25.
•
The patient ID can be up to 20 alphanumeric characters in length. The
accession number and password barcodes can be up to 13 alphanumeric
characters in length.
•
Within each barcode, you can turn any characters off that you do not want the
system to include as part of the patient ID or the accession number.
•
The system automatically turns off any non alphanumeric characters, such as
hyphens, that are displayed in the barcode.
•
You can specify 1 or 2 fixed lengths for Interleaved 2 of 5 barcodes.
NOTE:
system, connect the barcode scanner to the system. Refer to Connecting the
Barcode Scanner‚ page 8-26, before completing this procedure.
1. At the Setup screen, select
NOTE:
the barcode scanner on.
2. You can select
If the barcode scanner was not connected during installation of the
If you have selected the Required QC analysis option, you must leave
to turn the barcode scanner on or off.
barcode
Status
.
Save
Printer and Devices > Bar Code Setup
or
.
Full
to include ranges
Ranges
.
02087462 Rev. V
8-23
Advertisement
Table of Contents
Troubleshooting
