Setting Up Qc; Setting Up Qc Options - Siemens Rapidlab 1200 Operator's Manual

8-2

Setting up QC

When you select QC at the Setup screen, the following options are available:
• QC Options
• Required QC Schedule
• Required QC Ranges
• AutomaticQC Schedule
• AutomaticQC Ranges
• High G/L

Setting Up QC Options

Use the QC Options screen to enable or disable a QC option, enable or disable syringe QC,
require Operator identification, and select a method for QC range checking.
1. At the Setup screen, select
2. At the QC options screen, select a performance option:
If you want...
to perform QC sample analysis on an as needed basis,
to require operators to perform QC sample analysis
according to a schedule,
the system to perform QC samples as scheduled in QC
Setup,
3. If you select AutomaticQC and you want all failed AutomaticQC samples to repeat,
select
4. Select the
5. At the area labeled Required Field, select
identification screen when an operator is analyzing QC samples.
6. To make the Operator ID a requirement, select the
7. Select a QC Range Checking Methodology:
If you want to...
use the manufacturer's low and high ranges for QC range
checking,
to perform RiliBÄK analysis (does not apply to CO-ox
fractions),
If you want to customize ranges, follow the procedure in the next section, Entering
Customized QC Range Limits‚ page 8-3.
02087462 Rev. V
Rapidlab 1200 Operator's Guide: System Configuration
QC Options
.
Repeat
button to enable syringe QC samples.
syringe QC
.
Select...
Unscheduled QC
Required QC
AutomaticQC
to display the operator
Operator ID
button.
Required
Select...
Low, High
RiliBÄK
.
.
.
.