Maintenance - Siemens MULTIMOBIL 5C Troubleshooting Manual

Hide thumbs Also See for MULTIMOBIL 5C:
Table of Contents

Advertisement

Service Instructions
Multimobil 5C
The system should be moved only manually, by the handles provided for this purpose.
whenever exceptions must be made , note the points of potential injury between the
movable system parts and their guide openings. The system areas marked in the
drawings indicate points of crushing or impact hazards for the patient or the operator.
Points of injury for operator
Points of injury for patients.
Note: The system shown above is with 9" II system. The points of injury are identical for 6" II system.

1.7 Maintenance

All parts, modules of this product must be tested, inspected, for performance and
safety aspects every 12 months to ensure that the product functions properly and is
safe for patients, operating personnel and other persons.
Every 12 months, trained technical personnel should inspect and if necessary replace
system components of the generator, which may result in hazard due to excessive
wear and tear.
If more frequent inspections and maintenance are required by federal or local
regulations, ensure compliance with them.
Siemens Ltd. Med India
Version 5.0
Page 7 of 73
Copyright © SIEMENS LTD. All rights reserved. For internal use only

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents