Defining Operator Ids And Passwords - Siemens Rapidlab 1200 Operator's Manual

Rapidlab 1200 Operator's Guide: System Configuration
The Unrestricted access setting allows for more access with fewer password
requirements on every level.
Table 8-3
Function
analyzing samples
recalling data
replacing cartridges
initiating calibrations
accessing Setup
options
accessing Diagnostics
accessing the Restore
QC screen
accessing secured
options

Defining Operator IDs and Passwords

You can enter, edit, or delete operator IDs and passwords and specify the level of
access for each operator. Refer to the tables in Setting up Operator Security
Levels‚ page 8-35.
If your Rapidlab 1200 system is connected to a data management system, you can
turn on the option to notify operators when their password is about to expire. The
message is displayed 14 days before the password expires.
The default operator ID and password is 12345, with Level 1 access. Define at
least 1 operator with Level 1 access and then delete the default operator ID. You
can enter information for up to 5000 operators. Ensure at least one Level 1
operator is entered in the operator list when you download operators to the system
NOTE:
slow while the analyzer is processing the new list, if the operator list downloaded
to the system is large or a large preexisting operator list is modified in instrument
setup.
1. At the Setup screen, select
Each operator ID and password combination must be unique.
Unrestricted Access Setting
Level/Pass
1
Yes/No
Yes/No
Yes/No
Yes/No
Yes/No
Yes/Yes
Yes/Yes
Yes/Yes
Instrument screen transition time into and out of instrument Setup may be
Level/Pass Level/Pass
2 3
Yes/No Yes/No
Yes/No Yes/No
Yes/No Yes/No
Yes/No Yes/Yes
Yes/No Yes/No
Yes/Yes No
Yes/Yes Yes/Yes
No No
Secured Options > Operator Security
8-37
Level/Pass
4
Yes/No
Yes/No
Yes/No
Yes/Yes
Yes/No
No
No
No
.
02087462 Rev. V