Performing A Patient Search; Patient Search Guidelines - Siemens Rapidlab 1200 Operator's Manual

2-28
Use buttons on the Results screen to perform functions:
To do this...
View results for more parameters,
Send the report to a data management system or an LIS,
Print the report,
If your system is set to Auto Print, the report prints automatically. Refer to Defining Send
System Data Option‚ page 8-26.

Performing a Patient Search

You can search for patient data using the following criteria:
• Patient ID
• Last Name
• Accession Number
• Operator ID
• Start Date
• End Date

Patient Search Guidelines

• Each criterion, except Start and End Date, must first be enabled in Setup.
If you want to enable... Then...
Patient ID or Last Name
Accession Number or
Operator ID
• Multiple criteria can be selected simultaneously.
• Results are returned only if patient records meet all entered criteria.
• Results for multiple patients are returned if multiple patients meet the entered criteria.
• Start and end dates are always available as patient search criteria.
• If Exact Match is selected and the field associated with Exact Match is blank, results
are only returned for patients for whom that criterion field is blank.
02087462 Rev. V
Rapidlab 1200 Operator's Guide: Operating the System
a.
Select Setup > Sample > Patient
.
Demographics
b.
Select one or more criteria.
c. Select
Save.
a.
Select Setup > Sample > Sample
.
Demographics
b.
Select one or more criteria.
c. Select Save.
Then select...
.
More Results
.
Send
the Print button.