Appendix F: Symbols - Siemens Rapidlab 1200 Operator's Manual

Table of Contents

Advertisement

Appendix F: Symbols

This section describes the symbols that may be on the exterior of the system or on
packaging. The symbols on the system provide you with the location of certain
components and with warnings for proper operation. The symbols on the system
or packaging provide you with other important information.
Symbol
Class 1
Description
indicates where you insert the sample device (syringe,
capillary, or ampule) to perform analysis
indicates a risk of exposure to biohazards
indicates a hazard or danger is associated with the product
indicates a risk of exposure to potential electrical hazards
indicates that the input electricity is alternating current
indicates important information about the fuses
indicates that the main power supply is on
indicates that the main power supply is off
indicates that the system is Class 1 type equipment having
basic insulation and additional safety grounding precautions
indicates a caution or warning.
Refer to Section 1, Using This Guide, Conventions.
indicates that the system is listed by UL as meeting safety
requirements for medical equipment with respect to electrical
shock, fire and mechanical hazards only in accordance with
UL 60601-1, Can/CSA C22.2 No.601-1
indicates that the system meets the requirements of the
European Union
indicates the area where you write the date you install the
cartridge on the system, if required
02087462 Rev. V

Advertisement

Table of Contents
loading

Table of Contents