Table of Contents
Advertisement
2-30
Recalling Patient Sample Results
Use the Recall screen to view and print results for previously analyzed patient samples.
You can also send the recalled results to a data management system or a laboratory
information system (LIS).
For more information about changing demographic data for previously analyzed patient
samples, refer to Editing Demographics‚ page 2-25.
1. At the Analysis or Status screen, select
The list of patient samples are displayed.
2. Select the sample or locate the patient sample results you want to view.
If you want to...
view additional
samples,
search for a sample by
patient ID,
3. View the results for the selected sample:
a. Select
b. Select
c. Select
d. Select
Interpreting the Patient Recall Screen Symbols
The following symbols may be displayed on the Patient Recall screen:
Symbol
a
v
c
a-
µ
02087462 Rev. V
Rapidlab 1200 Operator's Guide: Operating the System
Then...
a.
Select the up or down arrow buttons to move
through the list.
b.
Select the sample you want to view.
a.
Select
Search
b.
Select
Clear
c.
Enter the patient ID and select
d.
Select the sample you want to view.
.
Results
to view results for other reported parameters.
More Results
to print the patient sample report.
Print
to send results to a data management system or an LIS.
Send
Definition
arterial sample
venous sample
capillary sample
mixed venous sample
a-v study sample
microsample, pH or pH, Glu, Lac sample
D code or message exists for this sample
demographics were edited
.
Recall > Patients
.
to delete the current patient ID.
Continue
.
Advertisement
Table of Contents
Troubleshooting
