Siemens Rapidlab 1200 Operator's Manual page 28

1-8
Waste moves from the measurement module through the pressure detector bubbler, and
into the reagent manifold. Waste moves through the reagent manifold and into the waste
bottle.
1
2
Figure 1-8
The waste bottle housing protects the waste bottle. The waste detector detects the presence
of the waste bottle and also detects when the bottle is approaching its capacity. The system
alerts you when the waste bottle is between 70 and 100% full. To reduce exposure to
biohazards when you remove the waste bottle, the system prevents fluidic operations from
starting.
02087462 Rev. V
Rapidlab 1200 Operator's Guide: System Overview and Intended Use
Path from the measurement module to the reagent manifold
Path from the reagent manifold to the waste bottle
Waste Path