Printing Reports; Procedural Notes For Printing Reports; Printing Reports On The Internal Printer - Siemens Rapidlab 1200 Operator's Manual

Rapidlab 1200 Operator's Guide: Operating the System

Printing Reports

You can print reports using the internal printer and, when installed, an external
printer. You can use the Setup–Printer Options screen to determine which printer
to use, how many copies to print and if the report is printed automatically. Refer to
Selecting Printer Options‚ page 8-22.

Procedural Notes for Printing Reports

• Each report contains the report name and the system name you created in the
Setup–Other Options screen.
Refer to Setting up Other Options‚ page 8-21.
• You can print most reports on either printer or both printers.
The only exceptions are the Maintenance Schedule and the Levey-Jennings
reports. You must print these reports on the external printer.
• The system filters error messages so that it only prints messages that affect the
reported results.
• The system disables the Print button when no paper is available in the
printers.

Printing Reports on the Internal Printer

For reports printed on the internal printer, the system feeds sufficient paper at the
end of every report to provide a "tear-off margin."
2-31
02087462 Rev. V