Siemens Rapidlab 1200 Operator's Manual page 104

2-16
10. Watch the sample move through the sample path and inspect the sample path for
bubbles or gaps.
•
•
1
2
Figure 2-5
If...
bubbles or gaps are present,
no bubbles or gaps are present,
11. If prompted, enter demographic information and select
You can scan the patient ID and accession number in the appropriate field. For more
information about entering the data, refer to Entering Patient Sample Data‚ page 2-22.
12. View the results.
For information about how results are displayed on the screen and in printed reports,
refer to Viewing Patient Results‚ page 2-27.
13. When you finish viewing the results, select
02087462 Rev. V
Ensure that the trailing edge of the sample remains in contact with the sample/
ground temperature sensor.
Ensure that the leading edge of the sample fills the reference sensor.
Sample/ground temperature sensor
Reference sensor
Measurement Module
Rapidlab 1200 Operator's Guide: Operating the System
Then...
select .
Cancel
select
Analyze
Continue
.
.
Continue
.