Replacing System Components; Replacing The Printer Paper; Replacing The Sample Port - Siemens Rapidlab 1200 Operator's Manual

5-42

Replacing System Components

This section contains procedures for replacing system components.

Replacing the Printer Paper

Replace the printer paper when a red stripe is displayed on the edge of the paper.
You need printer paper for this task.
1. Select
2. To start the procedure, select
CAUTION:
the printing mechanism.
3. Follow the instructions in the video.

Replacing the Sample Port

Use this procedure to replace the sample port. Replace the sample port if you detect a
problem, or if the system prompts you as a result of obstructions such as fibrin clots.
You need a sample port for this task.
BIOHAZARD:
Refer to Appendix A, Protecting Yourself from Biohazards for recommended
precautions when working with biohazardous materials.
1. Select
2. To start the procedure, select
3. Follow the instructions in the video.
02087462 Rev. V
Status > Maintenance > Replacing the Printer Paper
Do not pull the torn paper back through the printer. This can damage
Wear personal protective equipment. Use universal precautions.
Status > Maintenance > Replace Sample Port
Rapidlab 1200 Operator's Guide: Maintenance
.
Continue
.
Continue
.
.