Table of Contents
Advertisement
Application planning
4.1
Shipping
Shipping
NOTICE
Damage to the device
The device can be damaged by inappropriate shipping. Transport the device, therefore,
only in the original packaging. This will give it the necessary protection against shock and
impact.
Lifting and carrying the power output module (POM)
NOTICE
Damage to the device
The power output module (POM) is connected to the busbar adapter with 3 leads.
Do not use these leads to lift or carry the POM.
4.2
Storage
It is absolutely essential that the device is stored in compliance with the storage conditions
as described in Chapter Technical specifications (Page 163). In the event of ingress of dirt or
liquid into the equipment, formation of condensation, damage or any other failures to comply
with the prescribed storage conditions, the equipment must not be commissioned until the
correct remedial procedure has been discussed with Siemens AG.
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
4
29
Advertisement
Table of Contents
