Connection Method - Mitsubishi GT16 User Manual

5.3.2

Connection method

Use the following methods to connect with the GOT to ensure compliance with the EMC Directive.
Bus connection
Direct connection to CPU
Computer link connection
MELSECNET/H connection (PLC to PLC network)
CC-Link IE Controller Network connection
CC-Link IE Field Network connection
CC-Link connection (intelligent device station)
CC-Link connection (via G4)
Ethernet connection
GOT multi-drop connection
Other connections
*1 For details about each connection method, refer to the following manual.
*2 When connecting the GOT to other controllers as a PLC manufactured by other company, create the cable (by the user) and
configure the system to meet the EMC Directive specifications for the connected device.
(
MODBUS(R)/RTU or MODBUS(R)/TCP connection)
POINT POINT POINT
Connected devices
If connecting to the PLC or microcomputer other than Mitsubishi products
(MELSEC-Q series, MELSEC-L series, MELSEC-QnA series or MELSEC-A series) please refer to the EMC
Directive compliance manual for that specific device.
: Compliant with EMC Directive
*1
Connection method
•GOT1000 Series Connection Manual for GT Works3 and a controller used
•GOT1000 Series Connection Manual for GT Designer2/GT Works2
(9) PLC (manufactured by other company), microcomputer, temperature controller, inverter, servo amplifier, CNC,
5.3 EMC Directive-Compliant System Configuration
: Not compliant with EMC Directive
GT16
*2
1
2
3
4
5
6
7
8
5 - 8