Configuring VPRN Components
Configuring VPRN Components
This section provides VPRN configuration examples for the following entities:
Creating a VPRN Service
Use the following CLI syntax to create a VRPN service. A route distinguisher must be
defined in order for VPRN to be operationally active.
CLI Syntax: config>service# vprn service-id [customer customer-id]
The following example displays a VPRN service configuration.
*A:ALU-1>config>service# info
----------------------------------------------
...
...
----------------------------------------------
*A:ALU-1>config>service>vprn#
Page 428
•
Creating a VPRN Service
•
Configuring Global VPRN Parameters
•
Configuring Router Interfaces
•
Configuring BGP for VPRN
•
Configuring a VPRN Interface
•
Configuring VPRN Interface SAP Parameters
route-distinguisher [ip-address:number1 |
asn:number2]
description description-string
no shutdown
vprn 1 customer 1 create
route-distinguisher 10001:0
no shutdown
exit
7705 SAR OS Services Guide