Transmitting A Wakeup Signal To A; Compact Modem; Ranging To A Remote Modem; Figure 4-20 Compact Modem Button In The - Teledyne BENTHOS UDB-9000 User Manual

UDB-9000 Universal Deck Box - UDB-9000-M (Portable) and UDB-9000-MR (Rack Mount) Configurations

Transmitting a Wakeup Signal to a

Compact Modem

To ensure that when transmitting the wakeup signal to a Compact Modem it
will wake up, select the wakeup period for the modem as described in
"Selecting the Wakeup Period for a Compact Modem" on page 4-16.
To transmit a wakeup signal to a
Compact Modem, touch Compact
Modem Wakeup. The Compact Modem
Wakeup button is available in the
Release/Range screen when the
Benthos Smart Release/Modem
pop-up is open as shown in
Figure 4-20. The button is also
available in the Modem Comms screen
and on the Remote tabs of the Modem
Config screen. If the button is not
visible, touch Range Options to close
the Range Options pop-up. The button
is located behind this pop-up.
The wakeup signal is transmitted and
an information window opens during
the duration of the transmission
sequence as shown in Figure 4-21. The
window also displays the length of the
sequence in seconds. If the modem is
not awakened, a no response
indication is displayed in an alert
window.
Ranging to a Remote
Modem
The UDB-9000 can be used to acquire and display ranges to, and to acquire
and display the status of, any Teledyne Benthos manufactured acoustic
telemetry modem, including SMART releases and SMART modems. Before
acquiring ranges or status, always ensure that the transducer is connected.
4
Operation using the Touch Screen Display
Figure 4-20 Compact Modem
Button in the Release/Range
Screen
Figure 4-21 Waking up a
Compact Modem

Ranging to a Remote Modem

4-17