Remote Control; Using Built-In Help - Teledyne T3VNA Use & Care Manual

�
Perform two-points scaling in the waveform area to change the X-axis span;
�
Click on a screen parameter or menu for parameter selection or editing;
� Open and drag the marker;
� Use auxiliary shortcuts to perform common operations.
You can turn the touch screen function on and off via Display->'Touch Settings'.

1.9 Remote Control

The analyzer supports communication with computers via USB and LAN interfaces. By
using these interfaces, in combination with programming languages and/or NI-VISA software, users
can remotely control the analyzer based on a SCPI (Standard Commands for Programmable
Instruments) compliant command set, LabView and IVI (Interchangeable Virtual Instrument), to
interoperate with other programmable instruments.
You can also remote monitor and control the analyzer in Web Browser or Easy Spectrum.
For more details, refer to the 'Programming Guide' or contact your nearest Teledyne LeCroy office.
1.10

Using Built-in Help

The built-in help system provides information about every function key at the front panel and every
menu soft key.
�
Press Help and the embedded help would show up.
�
Click on the items in the contents tree on the left to navigate to any topics interested.
�
Click the green back or forward arrow to go back or forward to the contents just read.
�
Click the close sign button in the top right corner or press the Esc front-panel key to quit the help
system.
T3VNA
T3VNA1500
Figure 1-13 help information
T3VNA User Manual 15