Figure 6-1: Comm - Communication Modes Setup - Teledyne t100 Operation Manual

Teledyne API - T100 UV Fluorescence SO
Select which COM
port to configure
The sum of the mode
IDs of the selected
modes is displayed
06807F DCN7335
Analyzer
2
To turn on or off the communication modes for either COM1 or COM2, access the
SETUP>MORE>[COM1 or COM2] menu and at the COM1[2] Mode menu press
EDIT.
here
Figure 6-1: COMM – Communication Modes Setup
Communications Setup and Operation
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2
SETUP X.X COM1 MODE: 32
SET> EDIT
SETUP X.X COM1 QUIET MODE: OFF
NEXT OFF
Continue pressing NEXT to scroll through the
available Modes and press the ON or OFF button
to enable or disable each mode.
EXIT
EXIT
ENTR EXIT
129