Figure 6-1: Com1[2] - Communication Modes Setup; Operation - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer
06864B DCN6314
Communication Modes for each COM port must be configured independently. To turn
on or off the communication modes for either COM1 or COM2, access the
SETUP>MORE>[COM1 or COM2] menu and at the COM1[2] Mode menu press EDIT.
Select which COM
port to configure
The sum of the mode
IDs of the selected
modes is displayed
here
Figure 6-1:
Communications Setup and Operation
SETUP X.X COMMUNICATIONS MENU
ID INET COM1
SETUP X.X COM1 MODE: 32
SET> EDIT
SETUP X.X COM1 QUIET MODE: OFF
NEXT OFF
Continue pressing NEXT to scroll through the
available Modes and press the ON or OFF button
to enable or disable each mode.
COM1[2] – Communication Modes Setup
COM2 EXIT
EXIT
ENTR EXIT
145