General Purpose Input Interface - Altera cyclone V Technical Reference

29-20

General Purpose Input Interface

Table 29-28: Boot from FPGA Interface Simulation Model
Interface Name
f2h_boot_from_fpga
General Purpose Input Interface
The general purpose input (GPI) interface is connected to an Altera conduit BFM for simulation. You can
monitor the interface state changes or set the interface by using the API functions in the table below.
Table 29-29: General Purpose Input Interface Simulation Model
Interface Name
hps_io
Altera Corporation
BFM Name
f2h_boot_from_fpga_
inst
BFM Name
hps_io_inst
RTL simulation API Function
Names
get_f2h_boot_from_
fpga_ready()
get_f2h_boot_from_
fpga_on_failure()
RTL simulation API function names
get_hps_io_gpio_inst_HLGPI0()
get_hps_io_gpio_inst_HLGPI1()
get_hps_io_gpio_inst_HLGPI2()
get_hps_io_gpio_inst_HLGPI3()
get_hps_io_gpio_inst_HLGPI4()
get_hps_io_gpio_inst_HLGPI5()
get_hps_io_gpio_inst_HLGPI6()
get_hps_io_gpio_inst_HLGPI7()
get_hps_io_gpio_inst_HLGPI8()
get_hps_io_gpio_inst_HLGPI9()
get_hps_io_gpio_inst_HLGPI10()
get_hps_io_gpio_inst_HLGPI11()
get_hps_io_gpio_inst_HLGPI12()
get_hps_io_gpio_inst_HLGPI13()
Simulating the HPS Component
cv_5v4
2016.10.28
Post-​fit Simulation
API Function Names
get_boot_fpga_
ready()
get_boot_from_
fpga_on_
failure()
Send Feedback