Hps-To-Fpga Debug Apb Interface - Altera cyclone V Technical Reference

29-16

HPS-to-FPGA Debug APB Interface

Interface Name
h2f_usb0_interrupt
h2f_usb1_interrupt
h2f_wdog0_interrupt
h2f_wdog1_interrupt
h2f_uart0_interrupt
h2f_uart1_interrupt
HPS-to-FPGA Debug APB Interface
The HPS-to-FPGA debug APB interface is connected to an Altera conduit BFM for simulation. The
following table lists the name of each interface, along with API function names for each type of simulation.
You can monitor the interface state changes or set the interface by using the API functions listed.
Table 29-23: HPS-to-FPGA Debug APB Interface Simulation Model
Interface Name
h2f_debug_apb
h2f_debug_apb_
sideband
FPGA-to-HPS System Trace Macrocell Hardware Event Interface
The FPGA-to-HPS STM hardware event interface is connected to an Altera conduit BFM for simulation.
The following table lists the name of each interface, along with the API function name for each type of
Altera Corporation
h2f_usb0_interrupt_inst
h2f_usb1_interrupt_inst
h2f_wdog0_interrupt_inst
h2f_wdog1_interrupt_inst
h2f_uart0_interrupt_inst
h2f_uart1_interrupt_inst
BFM Name
h2f_debug_apb set_h2f_dbg_apb_PADDR()
set_h2f_dbg_apb_PADDR_
31()
set_h2f_dbg_apb_
PENABLE()
get_h2f_dbg_apb_PRDATA()
get_h2f_dbg_apb_PREADY()
set_h2f_dbg_apb_PSEL()
get_h2f_dbg_apb_
PSLVERR()
set_h2f_dbg_apb_PWDATA()
set_h2f_dbg_apb_PWRITE()
h2f_debug_apb_ get_h2f_dbg_apb_PCLKEN()
sideband
get_h2f_dbg_apb_DBG_APB_
DISABLE()
BFM Instance Name
RTL Simulation API Function
Names
Post-Fit Simulation API Function
Names
set_PADDR()
set_PADDR_31()
set_PENABLE()
get_PRDATA()
get_PREADY()
set_PSEL()
get_PSLVERR()
set_PWDATA()
set_PWRITE()
get_PCLKEN()
get_DBG_APB_DISABLE()
Simulating the HPS Component
Send Feedback
cv_5v4
2016.10.28