Hps-To-Fpga Cross-Trigger Interface - Altera cyclone V Technical Reference

cv_5v4
2016.10.28
simulation. You can monitor the interface state changes or set the interface by using the API functions
listed.
Table 29-24: FPGA-to-HPS STM Hardware Event Interface Simulation Model
Interface Name
f2h_stm_hw_events

HPS-to-FPGA Cross-Trigger Interface

The HPS-to-FPGA cross-trigger interface is connected to an Altera conduit BFM for simulation. The
following table lists the name of each interface, along with API function names for each type of simulation.
You can monitor the interface state changes or set the interface by using the API functions listed.
Table 29-25: HPS-to-FPGA Cross-Trigger Interface Simulation Model
Interface Name
h2f_cti
HPS-to-FPGA Trace Port Interface
The HPS-to-FPGA trace port interface is connected to an Altera conduit BFM for simulation. The
following table lists the name of each interface, along with API function names for each type of simulation.
You can monitor the interface state changes or set the interface by using the API functions listed.
Table 29-26: HPS-to-FPGA Trace Port Interface Simulation Model
Interface Name
h2f_tpiu
Simulating the HPS Component
Send Feedback
BFM Name
f2h_stm_hw_events_inst get_f2h_stm_hwevents() get_stm_events()
BFM Name RTL Simulation API Function Names Post‑Fit Simulation API Function Names
get_h2f_cti_trig_in()
set_h2f_cti_trig_in_ack()
h2f_cti_inst set_h2f_cti_trig_out()
get_h2f_cti_trig_out_ack()
get_h2f_cti_fpga_clk_en()
BFM Name
h2f_tpiu_inst
HPS-to-FPGA Cross-Trigger Interface
RTL Simulation API
Function Name
get_trig_in()
set_trig_inack()
set_trig_out()
get_trig_outack()
get_clk_en()
RTL Simulation API
Function Names
get_h2f_tpiu_clk_ctl() get_traceclk_ctl()
set_h2f_tpiu_data()
29-17
Post‑Fit Simulation API
Function Name
Post‑Fit Simulation API
Function Names
set_trace_data()
Altera Corporation