Call Waiting; Mute A Call; Dtmf Tones - NEC 535 Manual

Call Waiting

During a call, another received call is announced by a beep tone in the earpiece and an incoming message on the screen. To use
call waiting from the Call in progress screen when you hear the beep tone:
*
Press Softkey 1 to answer the new call and automatically place the current call on hold.
Finish the conversation and press END to terminate the new call.
Press Softkey 1 to retrieve the call on hold.
Press Softkey 1 to switch between the two calls.
To merge the two calls, press Softkey 2 (see Multi-party calls, on page ).

Mute A Call

To mute a call using the Phone function Options menu from the Call in progress screen:
*
Press MENU (Options Menu) and 2 or press and HOLD
Press MENU (Options Menu) and 2 or press and HOLD
When a call is muted and you accept a received call, mute is automatically turned Off. The mute function is automatically released
when a call is ended.

DTMF Tones

Dual tone multi-frequency (DTMF) tones are used to send digital signals to over-the-phone automated services that allow access
to information or accounts, e.g., use a specific language, access to specific information, account number and password to financial
accounts, voice mail, etc. These DTMF tones may be annoying during multi-party calls. You can turn DTMF tone Off to be
considerate so that the participants do not hear these tones when you input the number of another participant. The tones can only
be sent when a call is connected.
To turn DTMF tones Off from the Call in progress screen (during a phone call):
*
Press MENU (Options Menu) , 7, and 2.
To turn DTMF tones On:
*
Press MENU (Options Menu) , 7, and 1.
(Asterisk Symbol) key to mute the call.
(Asterisk Symbol) key to un-mute a muted call.
35