Incoming Call - NEC UNIVERGE SV9100 DT750 User Manual

2
4. Select Talk and then press
(Right-cursor) or OK softkey (or press
key).
[User Setting]
1

Incoming Call

2
Talk
3
Display
4
Change Password
5
Security
6
Peripherals
0
Setting Reset

2
5. Select DTMF Tone and then press
(Enter), (Right-cursor) or OK softkey
(or press key).
2
[Talk]
1 RTP Alarm
2
DTMF Tone
3 Key Touch Tone
4
Hold Music
5
Prefix

0
6. Select Automatic,
(see the following table).
Then press (Enter) or OK softkey to store the
setting.
(Enter),
2
1/1
Back
OK
1/1
Back OK
1 2
Disable or Enable
[DTMF Tone]
0 Automatic
1
Disable
2
Enable
MENU ITEMS
Follow the setting on the System. If no
0 Automatic setting is made in the System, the default
setting (DTMF=ON) is applied.
1 Disable Follow the setting on the terminal (OFF).
2 Enable Follow the setting on the terminal (ON).
For the setting on the System, contact the System
Administrator.
The currently enabled item is highlighted.
7. The display returns to the Talk screen.
Continue programming or press Exit for default
display.
25
1/1
Back OK
DESCRIPTIONS