Incoming Call Identification - NEC Xen IPK Features & Specifications Manual

Incoming Call
Identification
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Incoming Call Identification feature identifies incoming calls on Multiline
Terminals with an LCD. Internal calls are identified by showing the caller
name and station number. A ringing Tie line/DID call generates a display on
the LCD of the line number.
Terminal Type
All Multiline Terminals with LCD.
Required Components
None.
For an incoming internal call
1. The ICM LED flashes.
2. The caller station number and name (if assigned) are displayed on
the LCD.
When an internal call is received at a station, that station user number
is displayed to the left, and the station number and name (if assigned)
of the station where the call was initiated are displayed to the right on
the LCD. If the call is placed on hold, the station user number remains
and the number of the station where the call was initiated disappears.
In an Add-On Conference, the station numbers of the parties are
displayed.
Each station can be assigned a name (maximum of six characters,
including spaces).
Incoming Call Identification is provided for Internal Ring Transfer, Call
Forward, and CO Transfer Ring.
I-2
I2 – 357